Posts Tagged ‘barriers’

I also decided to make a number of straight walls, plus some right angled corners as this would give a lot of flexibility in setting them up on the table You will need: A sheet of 1″ thick polystyrene, either the expanded (beaded) type as I used, or the more expensive (but better) extruded type.

…You can use paint that already has texture medium in it, you can coat the polystyrene with PVA glue and then sand if you are going for a stone finish (if you are doing this, you will want to cut some stone blocks lines into the surface of the foam, a biro is ideal for this).